Small Engines (Lawn Mowers, etc.): Bent snow thower impeller?, snow thower, select shop

Question
I sucked a rock in my Murray #G2914010 machine. Now two of the impeller fins hit the nut that holds the auger belt tensioner. Is there an easy fix? Or do I need to replace the impeller?

Answer
Hello Joe:

Unless you Know a Machinist Personally, it will Cost More to Straighten and Balance the Old Impeller. I Always Suggest a New Impeller. Go to this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM (Murray) and Enter the Model Numbers. Then Double Click on your Model in the Results Area. Then Select the Section of the Mower you Wish to View. There should be a Breakdown of this Unit here. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

Hello Again Joe:

Try this Site Addy for the Impeller. http://www.outdoordistributors.com/ or 1-877-707-2787. Hope this Helps.

Respectfully

John