Small Engines (Lawn Mowers, etc.): MW GIL39032E tiller with BS 5HP engine, recoil starter, recoil spring

Question
I have a Montgomery Ward tiller (GIL39032E) with BS 5HP engine for which I need the cage that mounts to the side and holds the recoil pulley assembly. I also need the recoil spring and that assembly. I know its not a whole lot of info but I thought you might have some ideas/links where I might find something. I appreciate any input.

Thanks
Frank Koehler

Answer
Hello Frank:

You Require the Blower Housing (complete). This has the Recoil Starter and All the Components Required to Start the Engine. My Microfiche Tells me to Look at the Engines OEM Fiche for Engine Details. The Model Numbers are Usually Stamped Into the Blower Housing. The Common PN for the Blower Housing Assembly is B&S 390270. Remember that this is a General Part Number and the Handle Position May be Different and Require Another PN. I Suggest you Take the Mower to your Local Small Engine Service Center and have them Match the Correct Housing to the Engine. You can Also Contact Ourdoor Distributors @ 1-877-707-2787 for Assistance Alos. They May be Able to Assist. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John