QuestionQUESTION: I recently purchased a Powermate 5700w Generator (Yamaha MZ300 engine).
It is a pull start I am looking to possibly add an battery/electric start. It appears that wires and harness may be in place to take advantage of this option. However I cannot find information. Could you help point me in the right direction.
Thank You,
John
ANSWER: Hello John:
Send me the Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: Name Plate Data Off Engine
Yamaha MZ300(R)
Displacement 301 cu cm
Max Power
7.3kW/4000/(2000) rpm
Name Plate Data off Generator:
model no. PM0675700
AC Voltage: 120/240 v
Current: 47.5/23.8
Power Rated: 5700w
(svige): 7125w
Freq. : 60 HZ
Phase: single
Rpm: 3600
Power Factor: 1
Insul Class: F
Thank You,
John
AnswerHello Again John:
If the Engine Block has the Mounting Holes for an Electric Starter, then Contact Yamaha at 800-962-7926 and Give them the Information you Gave me. They can Locate the Part Numbers for the Flywheel and Starter Required to Install the Electric Starter on this Engine. I Can Not Locate the Information in my Microfiche or Online. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
