Small Engines (Lawn Mowers, etc.): Tecumseh dynamo, tecumseh hm100, prong plug

Question
I have a Tecumseh HM100-159024C SN 8202D on an Ariens ST1032 snowblower model 924044 SN 006288.  I'm trying to find out how many amps the alternator/dynamo is rated for.  There are two coils behind the flywheel (in addition to the ignition magneto).  Some number of magnets bonded to the inside of the flywheel but I can't remember how many.  Engine has three prong plug coming from coils and generates approximately 7 to 20 volts AC from idle to full throttle across each of the circuits.

Thanks,

Answer
Hello Russ:

According to the Breakdown the Rating for the Stator is 12V, 3 Amps. Since this is a Tecumseh Engine, I have a PDF Site Addy that May Assist you Also. http://www.tecumsehpower.com/CustomerService/BSI.pdf If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John