Small Engines (Lawn Mowers, etc.): twin 2, carburetor body, adjustment screws


Question
QUESTION: my mower will run fine but win i try to give it gas it will cut out an die is it in the crab i have a twin 2       modle 42a707 type 2623e1 code 9710145b

ANSWER: Hello Louis:

This Problem is Usually Caused by a Dirty Carburetor.  Remove, Disassemble and Soak the Carburetor Overnight in Carburetor Cleaner (I Use Gunk). I have Found that Most People can Use a Breakdown/IPL and Disassemble the Carburetor Enough for Proper Cleaning. You Only have to Remove the Bowl, Float Pin, Float (if Applicable)  and Needle Valve and Any Adjustment Screws that Go Into the Carburetor Body. The Welch Plugs Do Not have to be Removed. Then Soak the Carburetor Body and Parts in a 1 Gallon Can of Gunk Carburetor Cleaner Overnight. The Can has a Parts Tray Inside it for the Small Parts. Once the Carburetor and Parts are in the Cleaner, you can Replace the Lid for Safety and to Prevent Accidental Spillage. Then Blow Out the Passages with Compressed Air. Install New Parts if Required. You can View a Breakdown/IPL of this Engine at this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select the Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM and Enter the Model (5 or 6 Digits) and Type Numbers (first 4 digits Only). Then Double Click on the Model in the Results Area. Now you can Select the Section of the Engine you Wish to View. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: ok i have seen it blow wite smoke win i let off the gas and a flame it is suped up a little bit not much

Answer
Hello Again Louis:

Usually the Black Smoke is Gas, Blue Smoke is Oil and the White Smoke is Oil and Gas Mixed. You can View a Breakdown/IPL of this Engine at this Site Addy, http://www.outdoordistributors.com/ and Select the B. Then Select Briggs and Stratton. Then Select Don't have Part Numbers. Then Select the File # 42. Then Select the Folder # 42A700. This Model Engine has been Known to Drop a Valve Seat from Time to Time. If the Carburetor is Clean and the Flywheel Key is Good, then Remove the Cylinder Heads and Check the Valve Seats for Being Loose. Also, Replace the Fuel Pump Clamps with the Screw Type Clamps. I the Spring Type Hose Clamps Loosen, the Pump will Lose Prime and Not Pump Gas Properly and Cause the Problem you Described. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John