Small Engines (Lawn Mowers, etc.): echo trimmer flex drive shaft, flex shaft, shaft assembly

Question
How do you remove the flex shaft assembly from hte outer tube on an Echo trimmer?

Answer
Hello Greg:

Depending on the Model, you Remove the Shaft Assembly from the Power Head (Engine Assembly) and Remove the Flex Shaft from the Tube. If the Flex Shaft has Broken, then Both Ends on the Tube have to be Removed. On Some Model Echo Trimmers, the Shaft and Tube Come as An Assembly and Once the Flex Shaft Breaks, you Must Replace the Shaft Assembly (Tube and Flex Shaft comes as 1) because it Comes a Completed Assembly and the Trimmer Head End of the Tube is Attached so as Not to be Removed. Send me the Model and Type or Spec Numbers Off the Trimmer, Please. With these I can Locate the Proper Manual and Better Assist you. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John