Small Engines (Lawn Mowers, etc.): john deere kawasaki fc290v wont start, carburetor body, adjustment screws

Question
Hi I have a john deere 130 riding tractor. It has a kawasaki fc290v engine. I have replaced the gas tank cap,fuel line and the fuel pump and the engine still won't start. It cranks, it has spark and if you spray a little starting fluid it starts right up. Now I'm looking at the carb, should I replace it? Any info would be a great help.

Thank You

Rob.

Answer
Hello Robert:

You can View a Breakdown/IPL of the Mower at this Site Addy, http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.H... and Enter the Model Numbers and Click Find. Then Select the Sectional File. Then Select the Section of the Mower you Wish to View Online. Is the Gas Free Flowing to the Fuel Pump? Is the Fuel Pump Operating Correctly? If Yes to Both these Questions, then  Remove, Disassemble and Soak the Carburetor Overnight in Carburetor Cleaner (I Use Gunk). I have Found that Most People can Use a Breakdown/IPL and Disassemble the Carburetor Enough for Proper Cleaning. You Only have to Remove the Bowl, Float Pin, Float and Needle Valve and Any Adjustment Screws that Go Into the Carburetor Body. The Welch Plugs Do Not have to be Removed. Then Soak the Carburetor Body and Parts in a 1 Gallon Can of Gunk Carburetor Cleaner Overnight. The Can has a Parts Tray Inside it for the Small Parts. Once the Carburetor and Parts are in the Cleaner, you can Replace the Lid for Safety and to Prevent Accidental Spillage. Then Blow Out the Passages with Compressed Air. Install New Parts if Required. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John