Small Engines (Lawn Mowers, etc.): key start craftsman, john model, key start

Question
john,
model 917-378892
serial 041304m 002277
purchased 2004- the key start does not work. there is no response at all. what should I check or do I have to replace the whole thing?
thanks


Answer
Hello Robert:

Is the Battery Fully Charged/New? Check the Connections for Good Contact. Disconnect and Reconnect the Connections Several Times. This Tends to Clean the Mating Surfaces Enough to Make a Connection. Use a Volt Meter and Check the Voltage to the Starter when the Key is Held in the Start Position. There Should be 12.4VDC Minimum in the Battery and 11.0 - 11.4VDC Minimum When the Key is Held in the Start Position. You can View a Breakdown/IPL of this Engine at this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select the Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM and Enter the Model and Type Numbers (123K05-0344). Then Double Click on the Model in the Results Area. Now you can Select the Section of the Engine you Wish to View. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John