Small Engines (Lawn Mowers, etc.): belt routing for rear engine riding mower, question pool, pulleys

Question
Hi Paul,
i have a Dynamark rear-engine riding mower Model #A3210-000 which keeps breaking the drive belt (for the deck/blades). have replaced the bearings/quills but am not sure i'm routing the belt correctly - {i inherited the mower so don't have the owner's manual, but i do have a parts repair manual...}
can you help, please by sending me the routing diagram for the drive belt?

thanks

Answer
Hello David:

Sorry for the Delay. This Question was Located in the Question Pool. Are you Sure you are Putting the Belt On the Pulleys and Inside the Belt Guards. If you Put the Belt On and the Belt is Outside the Guard, it will Break the Beat Each Time you Run the Deck. What is the Year Model of this Mower, Please. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John