QuestionQUESTION: I have a Z5426 zero turn radius lawnmower. When I try to raise or lower the blade deck, it is hard and will not let me. It was working the other day and I ran over an area that popped it out of the length of cut I was doing. Now when I mow it looks like it is mowing uneven and will only let me set it on one height.
ANSWER: Hello Glenda:
Have Someone Raise and Lower the Deck. Watch the Deck Lift and you Should be Able to Locate the Section that is Binding. I am Trying to Locate the Breakdown/IPL for this Mower. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting you Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: I tried it and got it fixed. Thank you for all your help.
AnswerHello Again Glenda:
Great!! I am Glad you Located and Repaired the Problem. Thanks for the Update and Thanks for the Good Words and Ratings. Till Next Time. May All Your Mechanical Problems be SMALL ONES and May the All Mighty Bless You and Yours. Thanks Again.
Best Wishes and Good Luck
Respectfully
John
