Small Engines (Lawn Mowers, etc.): 10hp craftsman motion belt, clutch pedal, question pool

Question
My craftsman 10hp model 536.270112 has broken its motion belt. I have stood on my head trying to figure out how to get this tenasious belt replaced. Is there anywhere to get a print of how to replace this belt or would you have any suggestions.

Thanks,
Tooter

Answer
Hello Tooter:

Sorry for the Delay. This Question was Located in the Question Pool. Remove the Mower Deck from the Mower. Lock the Brake/Clutch Pedal. Remove the Motion Belt from the Transaxle Pulley and then from the Engine Pulley. You May have to Remove the Clutch Idler Pulley to Get the Belt On Properly. Go to this Site Addy, http://www3.sears.com/ and Enter the Model Numbers in the Upper Left Search Box and Click Go. Then Visually Verify the Equipment and CLick Continue. From this Page you can View Diagrams or Parts Lists for you Equipment. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting you Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John