Small Engines (Lawn Mowers, etc.): Tillotson HU carb linkage Craftsman mini tiller, craftsman mini tiller, tillotson

Question
Tillotson HU carb linkage Craftsman mini tiller, 32 or 38 cc engine with throttle on handle missing linkage part and getting nothing looking around O-line, upper side of carbs butterfly has a weird long plastic part that starts out as round L bent rod then after about an inch on the headed straight up after L bend, this round part opens up and spreads out into a curved flat about 3/4" wide and 2-3" long.
The throttle from handle ends about one inch from this round part down by the L bend. had a spring between them but I think that an other part is missing.
If I could just see a pic or diagram I would have better luck building something for it.

Answer
Hello Johnny:

Go to this Site Addy, http://www3.sears.com/ and Enter the Model Numbers in the Search Box at the Upper Left and Click Go. Then Visually Verify the Equipment and Click Continue. Now you can Select Either View Diagram or View Parts List. Hope this Helps. I am Here if You Require More Assistance. Let Me Know What Happens, Please. Thanks.

Good Luck

Respectfully  

John