Small Engines (Lawn Mowers, etc.): cubcadet hydro 1610, carburetor linkage, adjustment screw

Question
just bought it from a naber would not stay running for mor than a sec. so i got new plugs cleaned the carb rebuilt the fuilpump new air filter fuil filter and now it runs but it sounds like im only getting half throtel im getting a new adjustment screw today so i hope it is that just would like to know if it is now that what could it be  

Answer
 Hello Ronald:

 You can View a Breakdown/IPL of the Mower at this Addy http://www.partstree.net/parts.asp and Select the Shop Online Part Look Up. Then Select the Model Tab. Then Select the OEM (Cub Cadet). Then Enter the Model Numbers 1610 and Click Search. Then Double Click on the Model in the Results Area. Now you can Select the Area of the Mower you wish to View in Breakdown/IPL form. I Don't See the Adjustment Screw Being the Cause for this Problem. The Only Adjustment Screw Shown is the Idle Adjusment. Did you Disconnect the Governor Arm from the Governor Shaft when you Removed the Carburetor? Is the Carburetor Linkage Connected Properly? Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John