Small Engines (Lawn Mowers, etc.): 2 stroke chainsaw, oil mixture, fuel mix

Question
if regular gas without the oil mixture goes through a Chainsaw is the cahinsaw ruined. is there a quick or easy remedy such as flushing the lines or is the egine ruin
thanks
r

Answer
 Hello R:

 Did the Saw Lock Up? If Not, then it May be OK. Remove the Muffler and Inspect the Cylinder and Piston. Are the Cylinder or Piston Scarred Deeply? If No, then Remove the Spark Plug and Put a Small Amount of Engine Oil in the Cylinder and Turn the Engine. Empty the Tank and Lines. Refill with Good Fuel Mix. If No Damage was Done, then the Saw will Run Properly. If there is Damage, then you will have Trouble with the Saw.Hope this Helps. I am here if you require more Assistance. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John