Small Engines (Lawn Mowers, etc.): murray rider deck removal, rider deck, pulley

Question
I need to replace the pulley assembly on my rider. Can you assist me in removing the deck on it.  I believe the model # is 77600.  I see several pins that I think you pull out to remove the deck just not sure.  Thanks!

Answer
 Hello Scott:

 The Murray Number is Not Complete. Send me the Full Murray Number Off of the Mower and I May be Able to Locate a Breakdown of the Mower for you to View Online and this Breakdown will Assist you Better. However, the Clip Pins you are Speaking of are Most Likely the Ones you need to Remove. Look at the Deck Lift Linkage and you should be Able to Determine which Pins need to be Removed in Order to Disconnect the Deck from the Mower. Hope this Helps. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John