Question My Matis rototiller will idel, however when I go to run it, it boggs out! I put fresh fuel in it, and a new spark plug still has same problem!
AnswerHi Michael,
Try adjusting the carb. The high speed mixture screw is initially set at 1 & 1/2 turns out. Then adjust it to give good acceleration and top speed, while not closing the screw more than you need to. The low speed mixture screw is set at 3/4 of a turn out. Adjust that, to give a smooth idle. The 3rd screw, the idle speed screw, is set to give a low idle speed without stalling.
If no change, I would clean and rebuild the carb.
Let me know how you make out.
Michael
