Small Engines (Lawn Mowers, etc.): setting points, briggs stratton, horizontal shaft

Question
I have an old 2 1/2 horse Briggs & Stratton horizontal shaft engine.  Could you tell me the proper way to install and set the points and condenser?

Answer
The points are located under a cover under the flywheel.  You need to remove the flywheel to gain access.  Replacing the points is accomplished in the reverse order of how you remove them (simply put).  To set the gap (to 0.020" with a feeler gauge), The condensor needs to be slightly loose so it can move while you locate the points are on the highest point on the cam (most open condition).  Re-install the flywheel.  Hope this helps.