Toyota Repair: c-v axle, toyota camry, penetrating oil

Question
everything is fine removing c-v axle from '96 toyota camry except getting the transmission end out. i've tried prying banging, shaking, twisting, etc, no luck. what am i doing wrong? also is it possible to damage transmission with all that "abuse"?

Answer
After removing the lock bolt and snap ring, penetrating oil needs to be worked into that end of the shaft. Hit it on the opposite end with a small sledge while being careful not to damage anything. Make sure you replace the carrier bearing after all this abuse and inspect the surrounding area.

It's a pain in the ass, stick with it it will come loose.