Toyota Repair: throwout bearing, retaining clips, ken ken

Question
94 toyota p/u trk. standard transmission, 22r engine I am replacing the clutch and I need to remove the throwout bearing. I cannot get it to come out. Do I need a tool or is there something you can tell me to help remove. Thanks Ken

Answer
Ken,
The release bearing can be removed by using a screwdriver to unhook and detach the retaining spring from the pivot stud, then remove the
retaining clips.

The pilot bearing can be removed with a puller. It also can be removed by packing grease in the hole and behind it then insert
a round shaft slightly smaller then the opening and lightly tap on
it this will force the grease backwards and behind the bearing and
the pressure will push the bearing out.

Aquire from a local library or auto parts store a Haynes repair manual # 92075 page 8-5.