Toyota Repair: 01 Tacoma Wiring Harness Question, plastic tab, small electronics

Question
01 Tacoma V6
I have a wire cut right at the end of the connector that connects to the igniter.  Can these terminals be removed to solder some new wire?  If so, where can I get the tool.

Answer
Yes the terminals can be removed, most connectors use a small plastic tab which can be depressed with a thin sharp object from the front so the connector can be pushed out, some connectors have a white locking tab that has to be pulled out first, any electronics store should have the tool or you can use a very small electronics screwdriver.