Toyota Repair: 1992 4runner clutch, clutch master, hydraulic problem

Question
When I press my clutch to the floor and then release it just slightly, it wants to grab sometimes, then other times it works fine. Today when stopped, it didn't want to grab at all when I released the clutch and I couldn't shift into first gear to start moving forward. There isn't any slippage at all as I did replace my clutch about 6 years ago and that was the symptoms at that time. Any suggestions would be much appreciated. thanks

Answer
There is a hydraulic problem, there is a fluid leak or an internal problem with one of the clutch cylinders, check the hydraulic flex hose on the right side of the firewall, these are known to leak, if not, I would recommend replacing the clutch master and the release cylinders.