Toyota Repair: Electric Window Anti Pinch Reset, toyota landcruiser, master switch

Question
I just repaired the window regulator in drivers side door of my 1998 Toyota Landcruiser. The window goes up fine but when it is fully closed, the window automatically comes back down a couple of inches. It's my understanding that there is a anti-pinch mechanism that needs to be reset so this does not happen.

How do I reset this mechanism?

Answer
There is no reset switch, in this case the repair manual is wrong and misleading. The first time I came across this we finally had to call the toyota tech line for help.
To initialize the jam protection function do the following:
Remove the window regulator and motor again
Remove the motor from the regulator
Attach the motor to the electrical connector
With the key in the on position
Press the auto down switch until the motor stops
Make a mark on the gear(this will help you count the revolutions of the motor)
On the window master switch push "manual up" and watch the gear and let it turn at least six revolutions but no more than ten
Reassemble everything and it will work.