Toyota Repair: 03 Toyota Tundra Front Strut Replacement, mounting bolt, bottom arm

Question
How do I replace the Struts in the front end of my Tundra.  I assume I need a spring compression tool for the job, but I could use a step by step as to where to start?

Thanks

Answer
Yes a spring compressor is needed,just remove the bottom mounting bolt and the three 14mm nuts on the top, the bottom supension arm will drop down to get the strut out, on reinstallation you will need to force the bottom arm back up so that the lower bolt can be installed, you can use a jack to do this.