Toyota Repair: 93 toyota truck steering stabilizer, harbor freight, drag link

Question
how do i remove/replace? thank you.

Answer
If you are talking about the idler arm on the right side front(pass side) You should see 3 17mm bolts that hold it to the frame, knuckle with a 17mm nut with a coter key.  Remove the coter key, nut, take a puller if you have one or ware eye protection and where the shaft goes thourgh the drag link, hit with a good ballpin till the knuckle pops out, don't hit the threaded part of the idler knuckle unless you have a copper hammer not brase, these wonderfull copper hammers can be purchased at Harbor freight.com, copper is soft and will not hurt steel if you are talking about some other part of the steering I will look it up and get back with you.