Toyota Repair: Changing Camry drivers side window regulator, driven pulley, toyota camry

Question
What are the instructions for changing out the front drivers side electric window regulator (motor) on a 1995 Toyota Camry LE?  

Answer
Remove the door panel, move the window manually up or down until you can get access to the two 10mm bolts that hold the window to the regulator, pull the glass out through the top and put it in safe place, disconnect the electrical connector for the motor, remove the four 10mm bolts around the motor and the rest of the bolts that attach the regulator to the inside of the door, when they are all off the regulator will fall down into the door along with the motor, pull it through the opening, if the regulator came with the motor reinstall it, if the regulator has no motor you need to use the old motor, there are three screws attaching it to the regulator, remove them,the drive pinion on the motor is square as is the driven part of the regulator you will have to remove the metal cover and index the motor to the driven pulley by applying voltage to the motor to make it turn while lining it up with the regulator, if this sounds complicated, it's because it is. Once the motor is installed on the regulator reinstall it and hook the connector back up and move it up or down until you can reattach the window glass.