Tractor Repair: mx220 power steering hose removal, power steering hose, mount nuts

Question
I have an early serial number mx220 with a severly leaking power steering hose on the front of the firewall. It is the hose that connects on the top right side if you are sitting in the driver seat. It has 4 that go into the steering block it is the top right and runs down under the cab below the steering console. What is the best way to remove this hose? Can it be removed without removing the cab? The fitting on the front firewall is easy and I can feel the one under the cab. Just don't know what needs to come off to get to it. Thanks.

Answer
  The cab does not have to be removed, but it has to be raised up several inches to get underneath the front of it.   Dealers have cab lift tools that attach to the lower corners of the cab and after the cab mount nuts are removed, the cab can be raised up.