Tractor Repair: No console (dash) lights on 7110 Magnum, phillips screws, head screws

Question
Arnie-

 How do I get to the light(s) to the ditital readout on my 1989 magnum? I loosened the 4 phillups head screws but that segment seemed to stay tight.  The readout is visible in daylight, but at night, with lights turned on, background stays dark.
 Thanks

Answer
  After removing the phillips screws in the instrument cluster, it can be pulled out of the dash.  It might just be stuck, try prying on the edge with a screwdriver.  Once the instrument cluster is out of the dash, unplug the wires and completely remove it.  On the back of the cluster there are more screws that can be removed to take the back panel of the cluster off to access the bulb sockets.