QuestionI recently removed the adjustment screw from my John Deere 350 dozer to replace it. It is approx a 1970 model. When I replaced the screw the clutch stays engaged not matter what position it is in. Any suggestions? I have tried setting it a 1 3/8 inch like the manual states, but no luck.
AnswerDid you make sure the screws were the same length?
I have seen the screw used and it will through everything off.
What was the reason for replacing the screw?
If you can not get the clutch to disenge no matter what you do then the clutch will probably need replaced.
How many hour on the clutch?
Let me know what you find out and we will go from there.
If you would please rate my answer. Thanks
