Tractor Repair: air in fuel lines, case 580c backhoe, cylinder sleeve

Question
I recently had to install a cylinder sleeve in a case 580c backhoe and now am not able to get fuel to the injectors how do I bleed this system please

Answer
Hello,

   First open the bleed screw and bleed the air out of the fuel filters, then loosen all the injection lines at the injectors.  Crank the engine until fuel squirts out the line fittings at each injector, then tighten them all back up.  It should start right up.  If it runs for a few seconds and dies, repeat the procedure.

                         Arnie