Chevrolet: Chevrolet Tahoe 1995, chevrolet tahoe, timeing

Question
Hi roger,

after changing the gasket for the intake manifold
Iwant to readjust the ignition.

Where is the cable I must disconnect for this ?

Thanks in advance for your help

Regards
Ralf

Answer
i'am not shure what cable you mean did you remove the distributor to replace thr manifold gasket. if so yoy must re0set the timeing and you will have to remove the distributor if you did not mark it and pop no# 1 cyld. than put the dist in on no# 1 and be shure it is on the no# one plug and also it is on t.d.c. than you can snug up the dist nut and time it as in the book, be carefull and if you have trouble find someone that can help you with the re-instaling of the dist. if this is what you mean. ps sorry for taking so long asd i had my pc down for a few days.
good luck