Chevrolet: Water Leak, windshield molding, sealent

Question
Do you have any idea why I'm getting a ton of water on my driver sude floor board, when it rans?

Answer
Keith
     If this happens only when it rains than you have a leak someplace , I think that I would try to find where it is comming in from than seal it with silicone, you can take a bucket of water and pour it on the drivers side and look to see where it is comming in from.  there could even be a plug missing , or you could try to drive in a garage and open the hood with lights on and lay on the floor and try and see if you can see any light comming in threw a small crack,if yes seal it. How old is the car,is the windshield
molding bad if yes re-seal it. It is a leak from some place.
Get a small tube of sealent.that should do it. You dont want your wires to be getting wet under there.
good luck
roger/bigw45