4 Wheel Drive/SUVs: 97 chevy z1 4wd pickup, cam sensor, abs light

Question
QUESTION: i have a 97 chevy z1 4wd pickup it started stall at light or a low speeds then the other day i went to start it and no go  i replaced the module in the dist the cam sensor and the goil and as far as i can tell no spark i get no codes from code reader any way to test the ecu or tell me what might be the problem tyvm

ANSWER: On the scanner do you have a cam and a crank signal?

---------- FOLLOW-UP ----------

QUESTION: i just noticed that when i turn the key on ive got no power on gauges no chechk eng light no abs light all these should light up when you first turn the key on and they dont so i think this is why it doesnt start any ideas as to what is causing this it will turn over but wont start no spark i can hear fuel pump please help me im at my wits end tyvm

Answer
David, it sounds like maybe it might be the computer, with all the problems that you are having with your dash and stuff, it could be the ignition switch under the column too, its hard for me to do guess work over the net, but thats what I would say .. Thanks ADAM