Truck Repair: M11 Help, amp fuses, cummins m11

Question
Im working on a 1994 cummins m11 Ive got power to the ecm and fuel sender but the truck will not start I had a fault code for the #1 injector but truck should still start they drove it back from mich then all of a sudden it died on the turn pike for some reason if i give it a shot of either it will star for a second and thats it

Answer
To help find probable solution to this problem, you need to clarify the following;
1. Does the equipment have fault flash code display in the cab.
2. if so, does it display any flash code.
3. If no, ensure that your battery is ok, then check the connections to be tight and joints clean; check the 2 x 35 amp fuses whether they are cut replace if cut then try again.
to start and observe any flash code display.
Kindly let me know the result.

Regards,