Truck Repair: setting valves, screw out, jam nut

Question
I have a cummings celect N14 Plus. I need find out what you set the valves at? Can you Please help me as soon as possible. Thank you.

Answer
On the Celect,you adjust valves & inj on same cyl.The mark A is now 1-6,B is 2-5, & C is 3-4.Valves are Int 0.014 & Exhaust is 0.027.The injector you hand tighten screw until injector plunger bottoms out.Back screw out 2 flats,ie turn corner of lock nut to align with the riviot in the rocker lever(pushtube side),then back out screw two "corners" then tighten the jam nut down.Adjust the Injector first,then the valves.