Truck Repair: Antilock brake sensors, class a motorhome, sensor wires

Question
Hi Kasey. The ABS warning light stays on and I know why. A while back the calipers on my Class A motorhome seized up and fried the sensor wires. I want to either take out the bulb (which is in a sealed unit) or disconnect the wire to the warning light. It doesn't appear to be on a separate fuse. It would cost too much to have new sensors and wiring installed. Any ideas? Thanks, Mike.

Answer
ref your abs i see you gave me a 5 on the rating scale if you would have giving me a make on your class a motorhome or even a build frame or what it was based on i might have been more able to track down where or what to look at since there is alot of makers out there i cant give you all of the places to look or even if you can remove the blub... but once again thanks for the question