Truck Repair: ISM 330, screw out, torque specs

Question
I AM WORKING ON AN ISM 330 AND NEED TO KNOW THE VALVE SETTINGS FOR THE VALVES, INJECTOR AND JAKE BRAKE. I HAVE A MANUAL FOR THE M11 CAN I USE THE ADJ LISTED IN THAT AND THE TORQUE SPECS FOR THAT?
THANKS
JOHN

Answer
On the Celect or ISM engine,you adjust valves & inj on same cyl.The mark A is now 1-6,B is 2-5, & C is 3-4.Valves are Int 0.014 & Exhaust is 0.027.The injector you hand tighten screw until injector plunger bottoms out.Back screw out 2 flats,ie turn corner of lock nut to align with the riviot in the rocker lever(pushtube side),then back out screw two "corners" then tighten the jam nut down.Adjust the Injector first,then the valves. The Jake Brake torque is the same as M11 & the clearance is on the metal tag on the brake.ISM & M11 are basically the same engine,just the electronics are different.