Questioni would like to run the overhead.
what are the torque specs on the valves and injectors. and what is the firing order to run the overhead.
and if possible, is there a site that has manuals for the m11 cummins.
Answer If it is a Celect engine(electronic)You set them like this.
On the Celect,you adjust valves & inj on same cyl.The mark A is now 1-6,B is 2-5, & C is 3-4.Valves are Int 0.014 & Exhaust is 0.027.The injector you hand tighten screw until injector plunger bottoms out.Back screw out 2 flats,ie turn corner of lock nut to align with the riviot in the rocker lever(pushtube side),then back out screw two "corners" then tighten the jam nut down.Adjust the Injector first,then the valves.
If it is a STC engine,they adjust differently.Let me know if it is & Ill tell you how to do it.
Oh yea,firing order 1,5,3,6,2,4
