Truck Repair: engine valves and injectors adjustment, screw out, celect

Question
What is the difference between the engine valve and injector adjustment of NTC350 engine and the M11-350E engine? do they have the same specification?  

Answer
Yes they are different.On the Celect,you adjust valves & inj on same cyl.The mark A is now 1-6,B is 2-5, & C is 3-4.Valves are Int 0.014 & Exhaust is 0.027.The injector you hand tighten screw until injector plunger bottoms out.Back screw out 2 flats,ie turn corner of lock nut to align with the riviot in the rocker lever(pushtube side),then back out screw two "corners" then tighten the jam nut down.Adjust the Injector first,then the valves.