The Dodge Caravan, first introduced in 1984, shares a number of mechanical similarities with its sister vehicles the Chrysler Town and Country and the Plymouth/Chrysler Voyager. As with these sister vehicles, the Dodge Caravan relies heavily on Mopar brand fluids. These steps apply to all model years of the Dodge Caravan.
Keep Mopar ATF+4 automatic transmission fluid on hand for use in a wide variety of applications. You can use it to refill or top off the fluid in your power steering reservoir, your all wheel drive overrunning clutch and your automatic transmission.
Use Mopar gear lubricant in 75W90 viscosity in your all-wheel drive power transfer unit and your all-wheel drive rear carrier.
Maintain the effectiveness of your Dodge Caravan's braking system by using Mopar DOT 3 and SAE J1703 brake fluid. Unlike many smaller passenger vehicles, it's acceptable to use DOT 4 or DOT 4+ brake fluid in your Caravan if DOT 3 is not available. Use only recommended brake fluids to avoid damage to or failure of your brake system.
Mix Mopar antifreeze 5-year formula with hybrid organic additive technology into an equal measure of distilled or soft, demineralized water. This 50-50 blend helps your engine's cooling system run effectively.
Run API certified engine oil that meets material standard MS 6395. A 5W-30 viscosity is preferred, but 10W-30 may be used if 5W-30 isn't available or if temperatures aren't expected to fall below 0 degrees Fahrenheit before the next oil change.
