How to Reset a Tundra ECU

When replacing sensors and performing maintenance on a Toyota Tundra, the engine control unit may not turn the indicator light off. Resetting the ECU turns the indicator off and wipes out any codes the ECU may have. This is best done after any repair work to ensure the codes stay gone as they will come back as soon as the ECU reads a faulty code or experiences an engine problem.

Things You'll Need

  • Socket wrench
  • Socket set
  • Open the hood for access to the engine compartment. Locate the battery on the front of the engine on the battery side.

  • Unscrew the negative cable on the battery. The negative terminal is indicated by the "-" symbol in front of the post.

  • Take the cable off the terminal. Leave it off for five to ten minutes.

  • Tighten the cable back on to the terminal. Tighten with a socket wrench.

  • Start the truck and ensure the "Service Engine" light is gone.