How to Maintain Power Steering Fluid Levels in a Subaru Outback

The Subaru Outback hit the market in 2000 to enter the expanding market for car-sized SUVs in America. For all Subaru Outback vehicles, there are basic at home maintenance procedures you can perform to prolong the life of your vehicle. Fluid maintenance should be performed regularly, including a power steering fluid check and inspection of the entire power steering system.

Things You'll Need

  • Power steering fluid
  • Check the level of your power steering fluid when you check the other fluid levels in your Subaru Outback. You should check power steering fluid, transmission fluid, brake fluid and coolant every 15,000 miles or sooner if you suspect a leak or experience a problem while driving.

  • Make sure that your vehicle is parked on a level surface and allow the engine at least half an hour to cool before checking the power steering fluid level, since warm fluid will read at a different level than cool fluid.

  • Locate the power-steering fluid reservoir on the passenger side in the engine department. The reservoir should be labeled.

  • Remove the cap and use the dipstick to check the fluid level reading. Clean the dipstick off with a rag first, then re-insert and remove to check the level. If the fluid is below the low-level mark, gradually add fluid to the reservoir.

  • Consult your owner's manual for the part number of the factory fill power steering fluid, or use any power steering fluid that is approved for use with Subaru vehicles. Information on vehicle compatibility is written on the bottle of any fluid sold on the shelf.

  • Conduct a thorough inspection of all of the power steering components visible when you check the power steering fluid. Check the reservoir, hoses and clamps for any parts that are worn or broken and replace faulty parts immediately to prevent leaks.