Car Alarms: car alarm, dash area, dodge intrepid

Question
QUESTION: I just got a new battery and the alarm on my 2001 dodge intrepid se is going off by itself even when no one is by it. How do I stop this from happening?

ANSWER: Please be more descriptive if possible.

"GOING OFF?"

I need to determine whether it's a factory alarm
issue or, if it's an aftermarket system you are
dealing with.

Ok let's clear up the terminology glitch here.

1. FACTORY/OEM alarm = Part of the original schematics
and plans from the manufacturer.
(horn honk, head lights flash, Starter may crank and
die, no spark)

2. DEALER INSTALLED alarm = Just that. Once the vehicle
is brought to a dealer, the dealer sub contracts the after market
security out.
(horn might honk, siren and parking lights flash, starter kill relya,
no start, no crank, just dead.)

3. AFTER MARKET alarm: Same as #2 but Customer IS AWARE that
the system was put in at the dealership, but may not
be informed of the brand name, or even what it's
total capabilities are.
(siren & parking lights flash, starter kill)

Which one applies to yours?

RM/ALARMTEK
CARALARMMAN.COM

---------- FOLLOW-UP ----------

QUESTION: On my car the dealer installed the alarm.  I see a switch under the dashboard. The lights flash and the horn honks all while a siren is sounding when noone is around it. How do i fix it?

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM