Car Alarms: 1995 Isuzu Trooper - kill switch, valet mode, isuzu trooper

Question
The car was bought used.  It has an alarm inside the
vehicle and I was not given a hand device to shut it to troubleshoot.  None has ever identified the problem until a AAA employee came along to tow me again.  If this mechanic does not know how,I am stuck.  How do I override the "kill" on the alarm system of my SUV?  Thank you.

Answer
Ok, should be fairly easy. To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

That should solve the troubles for now.
Repeat the steps to toggle back to valet when needed.

Let me know what you discover.

ALARMTEK
WWW.CARALARMMAN.COM