Car Alarms: 2000 nissan altima wont start, nissan altima, valet mode

Question
Car won't start. After trying to crank it, a ticking noise starts inside the car and then the security light stays on. Also I can't arm the system.

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you. If this fix does not work, I suggest
you tow it to Nissan for evaluation of they're
alarm.

ALARMTEK
CARALARMMAN.COM