QuestionHi! This has happened to me once before, and a friend went on the internet, learned how to reset it, and worked again for the next two years...he moved away, so i cant get him to do it again, and I have searched all day with no resolve on the internet...How to i reset my alarm? I believe it is facotory. Thank you SOOO much!
AnswerSounds like it's after market.
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.
The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.
That should solve the troubles.
Let me know what you discover.
ALARMTEK
CARALARMMAN.COM
