Car Alarms: prestige, valet mode, alarmtek

Question
Is there a reset button on an audivox prestige system, if so where is it at.  My remote wont work and the key wont start my truck..

Answer
Ok, an installer would place it in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

ALARMTEK
CARALARMMAN.COM