QuestionI believe the alarm is a Viper 300 which I got about 8 years ago. It is causing some problems and my wife just assume it be removed. I don't really care if all of the components are removed or not, I just don't want it on ever again. I didn't want to simply put it in valet mode b/c it will reset when the battery goes down or is replaced. Also, it's is "auto-locking" mode, so that would not be good if it ever reset. It would be nice to be able to use the original remotes that came with the car, but not necessary. Can I do something as simple as pull a fuse or disconnect from the battery?
AnswerYour question triggered this
automated responce to a
DEI equipment support inquiry...
Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.
(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )
You can either try www.directed.com or,
take this question to my online 12 volt
installation Technican forum
at www.installsupport.com.
Many of the technicians there can
assist you with this issue.
Good luck.
ALARMTEK
