QuestionHi, i have a 2004 kia rio, it has manual locks and i am trying to convert them to keyless entry locks. i also bought a car alarm. i installed most of it myself, then got some help from an expert. it is a commando car alarm keyless entry combo 520-S. The locks lock and unlock at the same time so i know they are working right. the car alarm works too. The only thing that doesn't work is the keyless entry. when i use the remote to unlock or lock the doors, nothing happens. i have been trying to figure this out forever, and i don't know what else to do. i hooked up the brown wire to the green wire and the blue wire to the white wire like they said and i have no idea what to do next. please help me!
Answerok, I need to check on something.
When you ground the brown wire on the central lock kit,
does it lock or unlock? Does the white wire do the oposite function?
If done correctly, these imputs are looking
for the green lock wire
and blue unlock wire from the 520s.
(negative trigger outputs).
This should work at this point.
If not, recheck the grounds, and
the connections.
Contact ryan@slickcar.com at Commando
if the trouble is not corrected for some
tech support on it.
ALARMTEK
