Audio Systems: Car radio installation, radio cd mp3, nissan 300zx

Question
Hi,
Thank you for reading me.

I want to install a new radio cd/MP3 in my nissan 300zx. The model is a pionner DEH-4600 and i want to know how to connect it if I want to add a subwoofer and a amplifier. That radio have 4 output of 50w each. If ever you can send me a wiring diagram that will help me a lot.

Best regards.

Andre

Answer
Andre,
If your stereo has low level (RCA) outputs you can use those outputs to run to the amp. If no RCA outputs are on the DEH4600 you will need a high level (speaker) to low level (RCA)output adapter. If you are going to connect only one sub woofer you should purchase a two channel amp and bridge the outputs into one output to the woofer. As for connecting the new stereo if the factory stereo connector is still in the dash you should purchase the wiring adapter the plugs onto the factory connector so that you can easily connect the new stereo to the existing wires.


TOM,
T&D ELECTRONICS
tdeser@zoominternet.net