Chrysler Repair: 1999 2.5L V-6: no spark, crank sensor, digit number

Question
My 1999 Sebring Convertible 2.5 has no spark. I have replaced the Distributor, rotor, cap, wires, and Spark Plugs. I get no spark to the plugs. I was told replace the PCM. Where is the PCM. Might this be the problem.

Answer
Hi Ron,
Have you tried the ignition key to get any fault codes that might be stored in the pcm memory? "On-off-on-off-on and leave on" doing that in 5 seconds or less elapsed time. Then watch the odometer window to see if the mileage reading changes to show a 4-digit number prefixed by a P. Let me know if you get one.
It could be that your crank sensor is bad, and that will produce the code P0320.
Also check fuse #5 in the power distribution box under the hood.
I would doubt it is the pcm.
Roland